- Tolva frontal
The AURA front hopper is SOLÀ's answer to the need to increase working capacity in the sowing process.
It is a pressurised hopper available in 2.000 litres capacity.
It provides the capacity to dose seed, fertiliser, micro granulated products.
It can be used as a hopper for product transfer.
Increased product distribution capacity.
Lower consumption of hydraulic oil in the tractor.
Greater homogeneity in product distribution.
Optimum product preservation due to hermetic sealing.
Lower fuel consumption in the tractor.
More efficient emptying.
Lower noise level.
Built to last
The volumetric distributor of the AURA is made of stainless steel with electric drive.
The AURA will communicate with the seeder and the tractor via the ISOBUS protocol. All the power and functionality offered by this technology applied to the seeding process.
The 50/50 split hopper allows the dosing of two independent products. In this case, the AURA is equipped with two distributors.
Due to its compact shape, the AURA will not interfere with visibility from the tractor cab during work and transport.
A wide variety of modular rollers are available for different dosage levels and product sizes.
|Hopper capacity [l]||2000|
|Height with wheels [mm]||1900|
|Metering unit drive||Electric|
|Weight with counterweights [kg]||900|
|Weight with counterweights and wheels [kg]||1110|
|Turbine drive||Choose between hydraulic or mechanical with PTO drive shaft at 540 rpm|
|Required hydraulic flow [l/min]||15|
|Turbine pressure control||Analogue pressure gauge as standard|
|Tractor hydraulic controls||1 + free return to tank (maximum pressure 1 bar)|
|Coupling category||CAT III|
|Reload opening [cm]||147 x 82|
|Height of reload without wheels [cm]||1725|
|Speed connection||7-pin. Optional, see chap. "GNSS receivers"|
|Signal lights and work lights||Standard|
|Dose calibration kit||Standard|
|Controller/monitor||Optional: Isobus or non-Isobus (see chap. "Control monitors")|
|Hopper pressurisation control||Analogue pressure gauge as standard|
|Hopper level sensor||Standard|
|Tractor requirements||Hydraulic front three-point hitch.
Front hydraulic control (1 SA + free return).
Front female electrical connector DIN / ISO: 1724.