New high performance planters’ range
 Designed to maximize the yield potential by planting with perfect seed singulation and spacing while maintaining a constant depth and seed-to-soil contact.

.

Advanced row unit design

1- Hydraulic downforce. Maintaining consistent depth with up to 350kg downforce.
2- Heavy duty parallel linkage. Reinforced cast iron arms for increased durability and reliability.
3- Floating row cleaners. Exceptional residue cleaning stars in toughest conditions. Optional side wheels for improved quality and stability.
4- Unique design 15’’ double disc openers with 9º between discs. Better seed placement with less compaction and soil disturbance.
5- Ground wheels and opener discs bearings with reinforced triple seals. Extra protection for longer life and lower maintenance costs.
6- Intermediate press wheels. Seeds are pressed into the bottom of the furrow ensuring constant depth and seed to soil contact for faster and uniform emergence .
7- Microgranular products hoppers. Up to two 20L hoppers, each featuring Isobus compatible electric drives with easy to adjust universal auger meter and up to 3 application points.
8- Large capacity hoppers 70L. More productivity and less refills, protected by moisture-tight covers with locks.
9- Most accurate and easy to use vacuum meters feature self-adjusting seed singulator and ejector wheel. Simple and reliable design allow for high precision seed metering at high working speeds and seeding rates.
10- Exclusive stepper motors with high torque at wide range of working speeds ensure high quality seed distribution across the field.

Tailored choices with one row unit

 
Wide range of options allows to specify planter for any customer needs, whether it is conventional, reduced tillage and direct seeding practices.


Planting perfection

The quality of the seed dosage has a direct impact on the final result. Each double seed reduces the yield potential of affected plants by 40-80%, and each omission results in a loss of yield opportunities of up to 100%. Each percentage improvement in seed singulation can increase yield potential by 1% or more. You can achieve up to 99% accuracy with our new Precision Planting distributor.


Hydraulic downforce

To maintain uniform depth VELOX is equipped with Hydraulic downforce system, with hydraulic cylinders ensuring equal pressure applied to every row, regardless of changing field conditions. Combined with tractor-to-planter Adaptive Weight Transfer system it can deliver up to ample 350kg pressure per row – sufficient to work in most challenging environments.

Seed meter

New vacuum seed meter by Precision Planting achieves accuracy of ≥99%. Benefit from the proven performance and reliability in metering various types and sizes of seeds. Velox seed meter is simple to adjust and maintain, as the seed singulator does not require adjustments. Additionally, it features a seed ejector wheel to clean seed disk holes and avoid skips.

Microproducts hoppers and meters

Ensuring that plants have proper protection and access to the specific nutrients at each growth stage is vital for their development and maximizing yield potential. Up to two micro-products can be applied either in the furrow between the closing wheels or seed openers, or over the furrow behind the closing wheels. Application of insecticides to protect seeds, starter fertilizers to support early plant development promote rapid plant’s growth. Each product is precisely metered by Isobus-compatible electric motors with section or row-by-row control, optimizing input utilization, reducing waste, and protecting the environment.
Specifications PF 300/8 PF 300/9 PV 300/11 PV 300/12 PV 300/12
Frame type Fixed row unit positions; folding frame for transport Central row unit positions adjustable by screw mechanism, hydraulically folding; folding frame for transport Row unit positions adjustable by screw mechanism; folding frame for transport Central row unit positions adjustable by screw mechanism, hydraulically folding; folding frame for transport
Linkage category Cat. III
Seeding unit VELOX
Transport width (m) 3 3 3 3 3
Number of rows 8 9 11 12 12
Row spacing according to selected equipment (cm) 70-80 60-65 11 a 65-70 12 a 45-50 / 9 a 64-65 / 8 a 70-80 12 a 50 / 11 a 65-70
Seed spacing adjustment Via ISOBUS terminal (not included as standard; see “Control terminals” section)
Fan drive Hydraulic
Number of support or drive wheels 2 support wheels
Wheel dimensions 23 x 10.5
Base machine weight without options 1960 2080 2400 2490 2620
Minimum tractor power required (hp) 150 170 180 190 190
Seed metering unit drive Electric, ISOBUS
Speed signal input 7-pin connector. Other options available in the “GNSS receivers” section
Seeding control Via ISOBUS terminal (not included as standard; see “Control terminals” section)
ISOBUS compatibility Check compatibility between the ECU and the tractor’s ISOBUS terminal. See the “ISOBUS compatibility questionnaires” section
Tractor hydraulic requirements Hydraulic fan: 1 SCV + free return / Frame folding: 1 DA / Row unit pressure: 1 DA / Row marker: 1 DA
Required hydraulic flow (L) 30 L + 10 L (if fitted with hydraulic downforce)
Fan vacuum monitoring Analogue vacuum gauge as standard
Section control Via ISOBUS terminal (not included as standard; see “Control terminals” section) – Requires licence, speed signal and positioning
Variable rate application Via ISOBUS terminal (not included as standard; see “Control terminals” section) – Requires licence, speed signal, positioning and prescription maps
Power supply Via ISOBUS connection / Additional supply cable from the tractor battery (depending on options)
Seed hopper capacity (L) 70
Depth control wheels Optional: 400 x 115 solid or spoked wheels, or 400 x 65 wheels
Rear closing wheels See “Options” section
Row unit downforce Hydraulic cylinders on each row, up to 350 kg downforce / Springs with 6 settings, up to 250 kg downforce
Hydraulic row markers Optional, with plain disc set to the tractor wheel track (1)
Road lights As standard
Seed discs 1 set of maize seed discs – Ø4.5 × 27 holes included per machine (see “Seed discs” section)
Microgranule hopper capacity (L) 20
Fertiliser metering unit drive Electric, ISOBUS

Scroll horizontally to view all models →

Specifications TV 300/6 TV 300/6 TV 300/7 TV 300/7 TV 300/8 TV 330/8 TV 300/9 TV 330/9 TV 380/8
Chassis type Adjustable row unit positions, telescopically folding chassis for transport
Linkage category Cat III.
Seeding unit VELOX
Transport width (m) 3 3 3 3 3 3.3 3 3.3 3.8
Number of rows 6 6 7 7 8 8 9 9 8
Row spacing depending on selected equipment (cm) 45-75 50-80 7 rows at 45-60 / 6 rows at 70-80 50-80 40-75 45-80 9 rows at 40-55 / 8 rows at 65-75 9 rows at 40-60 / 8 rows at 70-80 55-95
Seed spacing adjustment Via ISOBUS terminal (not supplied as standard; see “Control terminals” section)
Fan drive Hydraulic
Number of support or drive wheels 2 support wheels
Wheel dimensions 23 x 10.5 23 x 10.5 23 x 10.5 23 x 8.5 23 x 10.5 23 x 10.5 23 x 10.5 23 x 10.5 23 x 10.5
Weight of base machine without optional equipment 1540 1520 1640 1660 2050 2065 2165 2180 2110
Minimum tractor power required (hp) 120 120 130 130 150 150 170 170 150
Seed metering unit drive Electric ISOBUS
Speed signal input 7-pin connector. Other options available in the “GNSS receivers” section
Seeding control Via ISOBUS terminal (not supplied as standard; see “Control terminals” section)
ISOBUS compatibility Check compatibility between the ECU and the tractor’s ISOBUS terminal. See the “ISOBUS compatibility questionnaires” section
Tractor hydraulic requirements Hydraulic fan: 1 single-acting spool valve + free return / Chassis opening: 1 double-acting spool valve / Row unit pressure: 1 double-acting spool valve / Fertiliser fan: 1 single-acting spool valve / Marker: 1 single-acting spool valve
Required hydraulic flow (L) 30 L + 10 L (if fitted with hydraulic downforce) + 40 L (if fitted with a fertiliser unit)
Fan vacuum monitoring Analogue vacuum gauge as standard
Section control Via ISOBUS terminal (not supplied as standard; see “Control terminals” section) – Requires licence, speed signal and positioning
Variable rate application Via ISOBUS terminal (not supplied as standard; see “Control terminals” section) – Requires licence, speed signal, positioning and prescription maps
Power supply Via the ISOBUS connector / Additional power line from the tractor battery (depending on optional equipment)
Seed hopper capacity (L) 70
Depth control wheels Optional: 400 x 115 solid or spoked wheels, or 400 x 65
Rear closing wheels See “Optional equipment” section
Row unit downforce Hydraulic cylinders on each row, up to 350 kg downforce / Springs with 6 adjustment settings, up to 250 kg downforce
Hydraulic markers Optional, with plain disc marking the tractor wheel track (1)
Road lights As standard
Seed discs 1 set of maize seed discs – Ø4.5 × 27 holes included per machine (see “Seed discs” section)
Microgranule hopper capacity (L) 20
Fertiliser metering unit drive Electric ISOBUS
Share it: