VESTA SEED DRILL

Maximum capacity and versatility for a range of sowing systems

The SOLÀ VESTA is a high-capacity pneumatic seed drill designed for farms seeking maximum productivity, precision and autonomy. Thanks to its 7,000-litre hopper and wide range of seeding equipment, it is suitable for conventional sowing, minimum tillage and non till sowing.

The VESTA can be fitted with the R, PT, DD, SM and the new NT sowing systems, offering a specific solution for every working condition. Among these, the new NT triple-disc unit stands out, developed to achieve maximum performance in non till sowing. Its design allows it to cut through crop residues, open the furrow and deposit the seed at a constant depth with minimal soil disturbance, achieving more uniform emergence even on fields with heavy plant cover.

Available with mechanical metering or the ISOBUS ELEKTRA electrical system, the VESTA combines SOLÀ’s more than 60 years of experience with the most advanced technology to deliver precise and efficient sowing.

Hopper with a capacity of 7,000 litres made of high-strength steel.
Optionally divisible for seed and fertiliser at a ratio of 60% and 40%.
Capacity for a third product by means of 2 optional hoppers of 205 litres each.
Floating chassis in three sections. ISOBUS mechanical or electrical metering by means of the ELEKTRA system.
Can be fitted with SM, PT, Double Disc and Tines Coulters.
Can also be fitted with 12-row PROSEM precision planters.


Multi-product divisible hopper

The hopper of the VESTA 2813 can optionally be configured in two parts for seed/fertiliser or seed/seed in a ratio of 60-40. In addition, it can be equipped with two outer hoppers for micro-granular products such as insecticides, micro-granular fertilisers, micro-irrigation, etc.

Double metering unit system

The combined seed and fertiliser spreader VESTA 2813 is equipped with two stainless steel distributors with easily interchangeable rollers for different products. This feature is standard on all ELEKTRA models.

Depth control on the lift

This system, which is fitted as standard on the VESTA, acts as a depth control on the linkage. It is adjusted by means of a plate and performs this function in addition to the main depth control system for the wheels of the sowing unit.
  600/30 680/34 760/38
Pulled hopper  
Seed hopper capacity [l] 7000
Seed/fertiliser hopper capacity [l] 4380/2620
Wheels (2) 550/60-22.5
Reload height [cm] 284
Reload opening [cm] 196X252
Metering unit type Stainless steel volumetric
Metering unit drive Mechanical
Turbine drive Hydraulic
Required hydraulic flow [l] 40
Controller/monitor Standard. See characteristics in chap. "Control monitors"
Half-width shut-off (4) Optional.
Minimum power required [hp]  160 160 180
Removable selector sieve Standard
Signal lights and work lights Standard
Dose calibration kit Standard
Diameter of the hole for the coupling pin [mm] 32
Seeding equipment  
Furrower type SM
Working width [m] 6 6,8 7,6
Number of rows 3 3 3
Transport width [m] 3,05
Number of rows 30 34 38
Row spacing [cm] 20,0 20,0 20,0
Double spring harrow Optional. First row of angled tines and second row of straight tines.
Depth control wheel equipment: number 2 wheels on wings and 2 wheels on central part 4 wheels on wings and 2 wheels on central part
Weight of hopper + seeding equipment [kg] - - -
Road transport type approval Check available type approvals per market
  500/31 600/37 700/43 770/47
Pulled hopper  
Seed hopper capacity [l] 7000
Seed/fertiliser hopper capacity [l] 4380/2620
Wheels (2) 550/60-22.5
Reload height [cm] 284
Reload opening [cm] 196X252
Metering unit type Stainless steel volumetric
Metering unit drive Mechanical
Turbine drive Hydraulic
Required hydraulic flow [l] 40
Controller/monitor Standard. See characteristics in chap. "Control monitors".
Half-width shut-off (4) Optional.
Minimum power required [hp]  160 160 180 180
Removable selector sieve Standard
Signal lights and work lights Standard
Dose calibration kit Standard
Diameter of the hole for the coupling pin [mm] 32
Seeding equipment  
Furrower type SM
Working width [m] 5 6 7 7,7
Number of rows 4 4 4 4
Transport width [m] 3,05
Number of rows 31 37 43 47
Row spacing [cm] 16,1 16,2 16,3 16,4
Double spring harrow Optional. First row of angled tines and second row of straight tines.
Depth control wheel equipment: number 2 wheels on wings and 2 wheels on central part 4 wheels on wings and 2 wheels on central part
Weight of hopper + seeding equipment [kg] - - - -
Road transport type approval Check available type approvals per market
  600/30 680/34 760/38
Pulled hopper  
Seed hopper capacity [l] 7000
Seed/fertiliser hopper capacity [l] 4380/2620
Wheels (2) 550/60-22.5
Reload height [cm] 284
Reload opening [cm] 196X252
Metering unit type Interchangeable modular rollers
Metering unit drive ISOBUS electric
Turbine drive Hydraulic
Required hydraulic flow [l] 40
Controller/monitor From ISOBUS monitor (not included as standard, see chap. “Control monitors”)
Sowing cut-off Standard
Half-width shut-off Only available on machines with 2 distribution heads. Automatic if combined with a GPS antenna.
Minimum power required [hp]  160 160 180
Removable selector sieve Standard
Signal lights and work lights Standard
Dose calibration kit Standard
Diameter of the hole for the coupling pin [mm] 32
Seeding equipment  
Furrower type SM
Working width [m] 6 6,8 7,6
Number of rows 3 3 3
Transport width [m] 3,05
Number of rows 30 34 38
Row spacing [cm] 20,0 20,0 20,0
Double spring harrow Optional. First row of angled tines and second row of straight tines.
Depth control wheel equipment: number 2 wheels on wings and 2 wheels on central part 4 wheels on wings and 2 wheels on central part
Weight of hopper + seeding equipment [kg] - - -
Road transport type approval Check available type approvals per market
  500/31 600/37 700/43 770/47
Pulled hopper  
Seed hopper capacity [l] 7000
Seed/fertiliser hopper capacity [l] 4380/2620
Wheels (2) 550/60-22.5
Reload height [cm] 284
Reload opening [cm] 196X252
Metering unit type Interchangeable modular rollers
Metering unit drive ISOBUS electric
Turbine drive Hydraulic
Required hydraulic flow [l] 40
Controller/monitor From ISOBUS monitor (not included as standard, see chap. “GNSS receivers”)
Half-width shut-off (4) Optional. Automatic if combined with a GPS antenna
Minimum power required [hp]         
Removable selector sieve Standard
Signal lights and work lights Standard
Dose calibration kit Standard
Diameter of the hole for the coupling pin [mm] 32
Seeding equipment  
Furrower type SM
Working width [m] 5 6 7 7,7
Number of rows 4 4 4 4
Transport width [m] 3,05
Number of rows 31 37 43 47
Row spacing [cm] 16,1 16,2 16,3 16,4
Double spring harrow Optional. First row of angled tines and second row of straight tines.
Depth control wheel equipment: number 2 wheels on wings and 2 wheels on central part 4 wheels on wings and 2 wheels on central part
Weight of hopper + seeding equipment [kg] - - 5750 -
Road transport type approval Check available type approvals per market
Share it:
CN-822012_ES_R_02.pdf CN-822012_ES_R_02.pdf CN-822012_ES_R_02.pdf 1.47 Mbytes Spanish
CN-822012_FR_R_02.pdf CN-822012_FR_R_02.pdf CN-822012_FR_R_02.pdf 1.47 Mbytes French
CN-822012_GB_R_03.pdf CN-822012_GB_R_03.pdf CN-822012_GB_R_03.pdf 1.47 Mbytes English
Catalogo Vesta RO web.pdf Catalogo Vesta RO web.pdf Catalogo Vesta RO web.pdf 4.45 Mbytes Romanian
Vesta RU web.pdf Vesta RU web.pdf Vesta RU web.pdf 1.05 Mbytes Russian
Vesta_2813_SM Siembra Directa.pdf Vesta_2813_SM Siembra Directa.pdf Vesta_2813_SM Siembra Directa.pdf 910.34 Kbytes Spanish